Vertex standard programming software vx 5400

And you'd have a radio whose only advantage over a Midland MXT-115 (5W Low, 15W high - '1'-'7' fixed low, '15'-'22' and repeater pairs 5 or 15W, no '8'-'14') is that you have available channels to duplicate frequencies with different CTCSS codes (going from one repeater to another on the same channel but with different codes requires navigating the MXT-115 menu system to change CTCSS code). If you have the 25W variant, you might squeeze it into service, taking into account the difference between 20kHz and 25kHz deviations. You have NO legal access to '8'-'14' which are limited to 0.5W (and maybe 12.5kHz) The 25W model has a low power of 5W so just squeaks by for the interstitial '1'-'7'. That would leave you with legal access only to the 8 primary channels ('15' to '22', and their repeater pairs). Original GMRS interstitial channels ('1' to '7' in the new consolidated number scheme) are limited to 5W max. The 50W model on UHF has a LOW power of 10W. 12.5kHz is traditional FRS bandwidth - audio is at nearly half of GMRS deviation, so will sound weaker (at best) on true GMRS equipment. Old models of this radio supported 25kHz bandwidth.įootnote states that units sold after Janu(ten years ago, for all practical counting) only support 12.5kHz bandwidth - the FCC mandate for Land Mobile/Business systems to convert to 'narrow band' operations. GMRS uses a 20kHz bandwidth (though I recall primary channels are spaced 25kHz apart). While the unit does cover GMRS frequencies and does have analog capability, not just DMR digital, there are a few problems. Can this be programed for GMRS and what software do I need? Any help would be appreciated.

Warning Be advised, serious penalties and prosecution can result from unlicensed transmission on frequencies which require a license, and/or interference with public safety transmissions.Īll Land Mobile radios (LMR) require an FCC license to operate.I have a Vertex EVX-5400 UHF radio. Once your order has been processed you can download your software using your account login. Important: You must LOGIN to your account BEFORE you order this software. Note: Software downloads cannot be cancelled, exchanged, or returned for refund once the order has been processed. VX-7100 and VX-7200 - FIF-12A USB Interface and CT-104A Cloning Cable.

VX-P820 and VX-P920 - FIF-12A USB Interface and CT-108 Cloning Cable.

Vertex-Standard accessories ( Sold Separately):.Microsoft® Windows® 2000, XP, Microsoft® Windows Vista®, or Windows 7 installed on your PC.To use this software, the following hardware and software are required: This software is designed to set frequencies and functions for the following Vertex-Standard radios: Vertex Standard CE76 Programming Software for VX-P820, VX-P920, VX-7100, and VX-7200 - Download Only

Vertex standard programming software vx 5400